Needs some heavy reworking of the functions.

Rotate fpr example

- works by slider only, no way to get a correct value other than by trial and error.

To few option to have some artwork on the page.

Generates high resolution artwork with a maximum output of 350dpi

Must be a joke 350 DPI and high resolution? Why can modern printers do output in the ecess of 1200DPI?

And - last but not least - it should state somewhere that the program requires .NET !

This version is definite not a keeper.

Brian  –  12 years ago  –  このコメントは役に立ちましたか？ はい | いいえ (+71)

翻訳

"Generates high resolution artwork with a maximum output of 350dpi."

I'm not sure how much contact the person writing that has had with the printing or reprographics industry, but in those circles 350dpi is not considered to be "high resolution" by any stretch of the imagination, with most shops asking for a minimum of 1200dpi for "camera-ready" artwork, whether in hardcopy or digital format.

In fact, 350dpi doesn't even take full advantage of the inherent resolution available from most home and office printers, which are usually based on either a 600dpi laser system or a 1200dpi inkjet printhead.

But I'm going to download, install, and play around with it anyway. After all, 350dpi is still pretty decent resolution, and should be just fine for most folks. Desktop publisher programs seem to have faded from the scene somewhat lately, perhaps because of the reduction of the use of printed media altogether. Everybody's getting their info digitally, and hardcopy is starting to become a thing of the past (although the IRS will make sure that it never goes away completely).

And besides - you sure can't beat the price today!

Once again, thank you my friends!

Don Hill  –  12 years ago  –  このコメントは役に立ちましたか？ はい | いいえ (+61)

翻訳

Nice little program - the installation is a bit confusing though.
1. When you unzip the downloaded file you are told to decide where to put the INSTALLER. 2. Run the installer from wherever you saved it. 3. After starting the program press the "upgrade to PRO" bottom to register the program.

Urban  –  12 years ago  –  このコメントは役に立ちましたか？ はい | いいえ (+54)

翻訳

According to their website, the Pro version is priced at 23.95$. However, what we get through this offer is a free limited version. Even after registering it. Useless gimmick to advertise about their pro version.

Abraham  –  12 years ago  –  このコメントは役に立ちましたか？ はい | いいえ (+52)

翻訳

Well this is an OK program for those small works!
If you want a pro desktop publishing program for free, Scribus open source is doing the work!
http://www.scribus.net/canvas/Scribus

Svend Ö  –  12 years ago  –  このコメントは役に立ちましたか？ はい | いいえ (+43)

翻訳